Results 1 to 4 of 4

Thread: Just registered and am impressed

  1. #1
    Junior Member
    Join Date
    Jun 2013
    Leafy Chilterns UK

    Just registered and am impressed

    Here in the UK some of us have a Line Router which is separate from the Home Hub..
    I have plugged in a 500G Usb Drive to the Home Hub and started to test from the HH to the
    42Panasonic TV [2012] in the lounge by ethernet cable..
    Recorded 'ts' files drom the Sat receiver work a treat and are as original quality.. but not tried Hi-Defn ones yet..
    Slight hiccups with simplistic 'wmv' files ...but thought I'd establish my goodwill here first..


  2. #2

    Thank you - I'm glad you like KRR and we'll iron out those WMVs. Can you please right-click on one of those in KRR and post the output of the File Information command here or open a ticket through and we'll take a look. Also, please check the Devices pane and let me know which device profile is used for your TV.

  3. #3
    Junior Member
    Join Date
    Jun 2013
    Leafy Chilterns UK
    Thanks for the quick reply dennis,,
    Herewith the FILE info from Right Click
    Video, DB: 1064, Thumb: 1140
    S [vc1, 72], bitrate: 1959000, framerate: 25.00, level: 2, profile: 3, flags: 0x4000, flags2: 0x0


    ffmpeg version N-53724-g716dbc7 Copyright (c) 2000-2013 the FFmpeg developers
    built on Jun 1 2013 16:27:53 with gcc 4.7.2 (GCC)
    configuration: --disable-shared --enable-static --arch=x86 --target-os=mingw32 --cross-prefix=/home/dennis/cc/mingw-w64-i686/bin/i686-w64-mingw32- --pkg-config=pkg-config --enable-gpl --enable-libx264 --enable-avisynth --enable-libxvid --enable-libmp3lame --enable-version3 --enable-zlib --enable-libopenjpeg --enable-libfreetype --enable-fontconfig --enable-libass --disable-w32threads --enable-bzlib --enable-libbluray --enable-dxva2 --enable-memalign-hack --enable-avresample --enable-runtime-cpudetect --extra-cflags=-DPTW32_STATIC_LIB
    libavutil 52. 34.100 / 52. 34.100
    libavcodec 55. 12.102 / 55. 12.102
    libavformat 55. 8.102 / 55. 8.102
    libavdevice 55. 2.100 / 55. 2.100
    libavfilter 3. 73.100 / 3. 73.100
    libavresample 1. 1. 0 / 1. 1. 0
    libswscale 2. 3.100 / 2. 3.100
    libswresample 0. 17.102 / 0. 17.102
    libpostproc 52. 3.100 / 52. 3.100
    Input #0, asf, from '\\Bthub4\USB4\2013Shares\MY VIDS\DVD_VIDEO_RECORDER Title 1.wmv':
    DeviceConformanceTemplate: M1
    WMFSDKNeeded :
    WM/WMADRCPeakReference: 16
    WM/WMADRCPeakTarget: 16
    WM/WMADRCAverageReference: 3
    WM/WMADRCAverageTarget: 3
    WMFSDKVersion : 11.0.5721.5275
    IsVBR : 0
    and the Device profile says
    This device profile should be used with Panasonic Viera TVs models DT, E, G, GT and UT manufactured in 2011 and later.
    and is
    PAN Viera TV [DT/E/G/GT/UT-series.2011]

    En passant.. I record to PAN harddrive then the DVD/RW then convert on PC to wmv using Freemake..Could i go from DVD Ram perhaps to a folder for KRR perhaps
    Thanks ernest

  4. #4
    Thank you for the file information.

    It'll be transcoded using that device profile. Can you please tell me the model of your TV and I'll check if you can use a better-suited device profile in KRR.

    Is there a way to copy files directly off the recorder, or must you burn them to a DVD first?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts